d thomas & betts 1555 lynnfield road memphis, tn 38119 (901) 682-8221 fax (901) 537-8805 d2 quality & innovation from the product group number of contacts grid size gm - molded thermoplastic polyester ps - glass epoxy sm - molded standoffs (refer to fig. 1) pin selection (table 2) plating options (table 1) footprint options (pg. d23) p part number example: pgm068-1a1132-v how to order pgm & pps series pin grid array sockets features: ? lif & superlif ? low insertion and withdrawal force contacts ? non-wicking closed bottom, precision sleeve protects 100% against flux and solder contamination ? custom design capabilities ? available in molded plastic (pgm) and glass epoxy (pps) insulators ? recognized under the component program of underwriters laboratories, inc. file e111362 ? high temperature insulators allow the sockets to be soldered with vaporphase and infrared reflow soldering process material specifications: insulator ........................ thermoplastic polyester or glass epoxy, ul rated 94v-0 sleeve ............................ machined brass/formed copper contact .......................... beryllium copper sleeve plating ................ see table 1 contact plating .............. see table 1 performance specifications: mechanical vibration ........................ passed mil-std-1344, method 2005.1, condition v, d, 11.6 gs (rms) shock .............................. passed mil-std-1344, method 2004.1, condition c, 100 gs durability ...................... passed mil-std-1344, method 2016, 50 cycles solderability .................. passed mil-std-202f, method 208 insertion force .............. above 150 pins - 37 grams (1.3 oz.) average with superlif ? a .018" (0,46) dia. polished steel pin insertion force .............. below 150 pins - 50 grams (1.7 oz.) average with lif a .018" (0,46) dia. polished steel pin withdrawal force .......... above 150 pins - 15 grams (.52 oz.) average with superlif ? a .018" (0,46) dia. polished steel pin withdrawal force .......... below 150 pins - 20 grams (.70 oz.) average with lif a .018" (0,46) dia. polished steel pin electrical contact resistance ........ 10 milliohms contact rating .............. 3 amps capacitance .................... 1.0 pf per mil-std-202, method 305 (contact to contact) insulation resistance .... 5,000 megohms min. @ 500 vdc per mil-std-1344, method 3003.1 dielectric withstanding voltage ...................... 1,000 volts rms per mil-std-1344, method 3001.1 environmental humidity ........................ passed mil-std-1344, method 1002, type ii operation temperature .. gold inner contact -55 c to +125 c tin/lead inner contact -55 c to +105 c thermal shock .............. passed mil-std-1344, method 1003.1, cond. a pgm168-7a1715-v pps238-7a1916-v v low force, six finger contact
d thomas & betts 1555 lynnfield road memphis, tn 38119 (901) 682-8221 fax (901) 537-8805 need more technical information? consult your thomas & betts sales office listed on the back cover d3 a b molded glass epoxy insulator size insulators insulators 9 x 9 .90 .950 .800 10 x 10 1.00 1.050 .900 11 x 11 1.10 1.150 1.000 12 x 12 1.20 1.250 1.100 13 x 13 1.30 1.350 1.200 14 x 14 1.40 1.450 1.300 15 x 15 1.50 1.550 1.400 16 x 16 1.60 1.650 1.500 17 x 17 1.70 1.750 1.600 18 x 18 1.80 1.850 1.700 19 x 19 1.90 1.950 1.800 20 x 20 2.00 2.050 1.900 21 x 21 2.10 2.150 2.000 22 x 22 n/a 2.250 2.100 23 x 23 n/a 2.350 2.200 24 x 24 n/a 2.450 2.300 25 x 25 n/a 2.550 2.400 dimensions listed are nominal pin grid array sockets pgm & pps series plating sleeve contact sleeve designation type plating plating 1 gold tin/lead 2 gold gold 3 tin/lead tin/lead 7 low gold tin/lead 4 gold tin/lead 5 gold gold 6 tin/lead tin/lead * solderless wrap available only in molded thermoplastic insulator. ? ? .166 .010 (4,22 0,25) .040 (1,01) max. .040 (1,01) max. .020 (0,51) .193 (4,90) .025 (0,64) sq. pc tails solderless wrap * table 1 - plating finishes pc tails solderless wrap* designation x dimension designation x dimension a .125" (3,17) b .180" (4,57) d .510" (12,95) table 2 - sleeve types molded insulator glass epoxy insulator note: head of sleeve is recessed in .030" counter bore note: head of sleeve sits above insulator ??sq. ? polarization marking or notch (optional) .100 (2,54) .100 (2,54) .166 .010 (4,22 0,25) .115 .010 (2,92 0,25) .062 .015 (1,57 0,38) .166 .010 (4,22 0,25) window optional insulator dimensions
|
